Sylgard 184 Silicone Elastomer Kit Dow Corning

Sylgard

Recent Searches

solar SYLGARD 184 SILICONE ELASTOMER ENCAPSULATION KIT, sylgard 184 price, SYLGARD® 184 SILICONE ELASTOMER KIT

Dow Corning Sylgard 182 Solar Panel Cell Silicone Elastomer Encapsulation Kit
Dow Corning Sylgard 182 Solar Panel Cell Silicone Elastomer Encapsulation Kit

Description

*GENUINE* DOW CORNING® Sylgard® 182 LONG POT LIFE / HEAT CURE Silicone (Polydimethylsiloxane, PDMS) Elastomer Encapsulation Kit. 2-part, clear/transparent, 10:1 mix ratio, heat cure, good strength, good flame resistance. Mixable by hand or by automatic mixing/dispensing method. Sylgard 182 is primarily intended to be a heat cured encapsulant due to its very slow curing time at room temperature. Working Time (Pot Life) at 25ºC (77ºF, room temperature) of Sylgard 182 is 8 hours. Curing time of Sylgard 182 at 25ºC (77ºF) is 336 hours or 14 DAYS. The curing time is, however, greatly accelerated with application of heat during curing. Curing time at 100ºC (212º) is reduced to 75 minutes and higher temperatures reduce curing time further (see Specifications below). It is possible to reduce the room temperature curing time by application of heat, however, if a shorter curing time encapsulant than Sylgard 182 is desired, Sylgard 184 (which we also sell in our eBay Store) should be used instead since it has a curing time at 25ºC (77ºF) of 48 HOURS, however, pot life is much lees for Sylgard 184 at approximately 1.4 hours at 25ºC (77ºF). APPLICATIONS: - Adhesive/encapsulant for solar cells - Protection of electrical/electronic devices. - General potting applications - Power supplies - Connectors - Sensors - Industrial controls - Transformers - Amplifiers - High voltage resistor packs - Relays - Adhesive handling beam lead integrated circuits during processing. SPECIFICATIONS: - Working Time at 25ºC (Pot Life): 1.4 hours - Cure Time at 25ºC (77ºC): 336 hours (14 DAYS) - Heat Cure Time @ 100ºC (212ºF): 75 minutes - Heat Cure Time @ 125ºC (257ºF): 30 minutes - Heat Cure Time @ 150ºC (302ºF): 20 minutes - Specific Gravity (Cured): 1.03.

Features

  • Transparent for easy board and part inspection. Two part, 10:1 mix. Service range of -45 to 200°C (-49 to 392°F).
  • Cures to flexible elastomer. No exotherm during cure. No solvents or cure byproducts.
  • Deep section cure - Repairable - Good dielectric properties - Low stress.
  • NOTE: Sylgard 182 requires EXTERNAL HEAT CURE otherwise it takes 14 DAYS to cure at room temperature.
  • NOTE: If you need a ROOM TEMPERATURE CURE product, Sylgard 184 cures in 48 HOURS at room temp., Amazon listing# B004IJENBG
SYLGARD 170 SILICONE ELASTOMER KIT DOW CORNING
SYLGARD 170 SILICONE ELASTOMER KIT DOW CORNING


Dow Corning Sylgard 182 Solar Panel Cell Silicone Elastomer Encapsulation Kit
Dow Corning Sylgard 182 Solar Panel Cell Silicone Elastomer Encapsulation Kit

Description

*GENUINE* DOW CORNING® Sylgard® 182 LONG POT LIFE / HEAT CURE Silicone (Polydimethylsiloxane, PDMS) Elastomer Encapsulation Kit. 2-part, clear/transparent, 10:1 mix ratio, heat cure, good strength, good flame resistance. Mixable by hand or by automatic mixing/dispensing method. Sylgard 182 is primarily intended to be a heat cured encapsulant due to its very slow curing time at room temperature. Working Time (Pot Life) at 25ºC (77ºF, room temperature) of Sylgard 182 is 8 hours. Curing time of Sylgard 182 at 25ºC (77ºF) is 336 hours or 14 DAYS. The curing time is, however, greatly accelerated with application of heat during curing. Curing time at 100ºC (212º) is reduced to 75 minutes and higher temperatures reduce curing time further (see Specifications below). It is possible to reduce the room temperature curing time by application of heat, however, if a shorter curing time encapsulant than Sylgard 182 is desired, Sylgard 184 (which we also sell in our eBay Store) should be used instead since it has a curing time at 25ºC (77ºF) of 48 HOURS, however, pot life is much lees for Sylgard 184 at approximately 1.4 hours at 25ºC (77ºF). APPLICATIONS: - Adhesive/encapsulant for solar cells - Protection of electrical/electronic devices. - General potting applications - Power supplies - Connectors - Sensors - Industrial controls - Transformers - Amplifiers - High voltage resistor packs - Relays - Adhesive handling beam lead integrated circuits during processing. SPECIFICATIONS: - Working Time at 25ºC (Pot Life): 1.4 hours - Cure Time at 25ºC (77ºC): 336 hours (14 DAYS) - Heat Cure Time @ 100ºC (212ºF): 75 minutes - Heat Cure Time @ 125ºC (257ºF): 30 minutes - Heat Cure Time @ 150ºC (302ºF): 20 minutes - Specific Gravity (Cured): 1.03.

Features

  • Transparent for easy board and part inspection. Two part, 10:1 mix. Service range of -45 to 200°C (-49 to 392°F).
  • Cures to flexible elastomer. No exotherm during cure. No solvents or cure byproducts.
  • Deep section cure - Repairable - Good dielectric properties - Low stress.
  • NOTE: Sylgard 182 requires EXTERNAL HEAT CURE otherwise it takes 14 DAYS to cure at room temperature.
  • NOTE: If you need a ROOM TEMPERATURE CURE product, Sylgard 184 cures in 48 HOURS at room temp., Amazon listing# B004IJENBG
SYLGARD 170 SILICONE ELASTOMER KIT DOW CORNING
SYLGARD 170 SILICONE ELASTOMER KIT DOW CORNING


Owens-Corning 500824 Garage Door Insulation Kit, Includes R-8 Fiberglass Panels with White Vinyl Facing, Insulates Single Garage Door Up To 9-Feet Wide
Owens-Corning 500824 Garage Door Insulation Kit, Includes R-8 Fiberglass Panels with White Vinyl Facing, Insulates Single Garage Door Up To 9-Feet Wide
Sale Price: $81.46

Description

Improve your garage's comfort with Owens Corning’s Garage Door Insulation Kit. A complete kit comprised of (8) durable R-8 fiberglass insulation panels with a tough, washable white vinyl facing. The kit comes with a unique fastening system that provides a quick and secure method to hold the panels in place. Each kit provides enough material to insulate a single car garage door up to 9-Feet wide.

Features

  • Designed for use on insulated metal garage doors; Fits neatly into the exposed channel of the door
  • 5 times better thermal performance (As compared to an insulated door)
  • 20-Percent reduction in noise level (as measured in standard human listening studies)
  • Installs in less than 1 hour (up to 9 foot door); Only tools needed for installation are tape measure, utility knife, straight edge and marker
  • Cleanable vinyl surface with mild detergent; Flexible material resists denting; Big performance in a small package ? 12 x 16 x 24-Inch
Dow Corning Rtv 732 Clear 3Oz Adhes Rtv732 Clear 3Oz Tube Silicone Adhesive Dow
Dow Corning Rtv 732 Clear 3Oz Adhes Rtv732 Clear 3Oz Tube Silicone Adhesive Dow
Sale Price: $14.95

Description

Application: Sealing Flashing, Vents, Flues, Gutters, Marine Cabins And Windows, Electrical Boxes, Caulking Joints In Sheet Metal Stacks, Ductwork, Bonding Appliance Parts, Signs And Sign Letters, Adhering Auto Trim, Appliance Trim, Name Plates, Making Formed-In-Place.

Features

  • Adhesive Material: Ethyltriacetoxysilane/Methyltriacetoxysilane.
  • Temperature Range: -76 to 350¡ãF.
  • Color: Clear.
  • Container Size: 3 oz.
  • Odor: Acetic Acid.
Owens-Corning 541799 R-10 Attic Stairway Insulator, for Openings Up To 24.5 by 54-Inch
Owens-Corning 541799 R-10 Attic Stairway Insulator, for Openings Up To 24.5 by 54-Inch
List Price: $75.00
Sale Price: $48.00
You save: $27.00 (36%)

Description

The Attic Stairway Insulator by Owens-Corning closes the insulation gap created by attic stair access points in residential housing, leading to reduced energy costs year round. The product is designed to cover access points up to 25-½ by 54-Inches.

Features

  • Available in one standard size to fit most attic stairwell openings; Made from R-10 insulation with durable foil facing on both sides
  • Helps reduce heat loss in the winter and heat gain in the summer
  • No assembly required-simply unfold and place over attic opening
  • Can be easily removed to access the attic
  • GREENGUARD certified; Made in the USA



solar sylgard 184 silicone elastomer encapsulation kit, sylgard 170 silicone elastomer kit, new sylgard 170 silicone elastomer kit black, dow corning sylgard 184 solar cell panel silicone encapsulation encapsulant kit, dow corning silastic 95 590 40 kit , dow corning silastic 95 590 80 kit new, dow corning 3 6077 rtv silicone ablative kit 5kg, new dow corning 3 6642 thermally conductive adhesive kit,